Wharfedale WPM-1

IN STOCK:

NOW: £175:00

WAS: £229:00

The WPM-1 is possibly the simplest yet effective way to achieve a clear monitoring signal, for all kinds of musicians. A microphone stand-mount receptacle and front-panel controls offer complete control to the musician with the ability to adjust volume and EQ so effortlessly adjustments could even be made during a gig. It fits in seamlessly into large and small PA setups without affecting the FOH signal so users can use independently without interfering with the main mix.

KEY FEATURES

5″ woofer
75W RMS / 150W Programme
120Hz – 18kHz
Easy solution for extra monitoring for any musician
Microphone, line/instrument and aux inputs
Microphone thru, line and mix outputs
Independent master and auxiliary level controls
Ultra lightweight gas assisted injection moulded enclosure
Dual angle micstand receptacles and microphone mounting system
IEC power supple
Switchable output sensitivity

NOTE: Stand/Microphone & Lead are not included

Multi-fit Mic receptacle

The monitoring system can be mounted to a combination of boom stand adaptors or normal upright microphone stands independently using the provided stand adapter and boom arm mount adaptors. The polypropylene molded cabinet of the WPM-1 makes a lightweight, portable speaker solution, which also is very safe on mounting to microphone stands. It’s ergonomic front tweeter section is covered in a solid grille, with the tweeter section doubling up as a convenient carry handle.

Keep the main mix unaffected

The WPM-1 has a microphone thru so the signal to send to your mixing. This means musicians can happily change the WPM-1 setting throughout their performance to their taste without causing unwanted level changes to the main mix being sent to the front of house.

Multiple inputs for all instruments

The WPM-1 has versatile line, mic and auxiliary level inputs so the speaker system can be used for keyboards, microphones and guitars alike.

SPECIFICATIONS

System Type Fullrange
Frequency Response @ +/- 3dB 120Hz – 18kHz
Peak SPL 114dB
Power (Continuous / Programme) 75W / 150W
Low Frequency Transducer 5″
Mic EQ Peak +/-15dB @ 2.1KHz
Inputs 1 x XLR,2 x 6.3mm Jack
Outputs 1 x XLR,2 x 6.3mm Jack
Mix Output Pre / Post Switchable
Dimensions (H x W x D) 285 mm x 315 mm x 330 mm

Share this post...

Facebook

Twitter